Loading editor…
A lovely place to start
Flat plaques print face up. Standing signs may need supports. Check the orientation, overall width and small lettering in your slicer.
Free STL downloads, no account needed · personal use today
Separate-part 3MF export is not available today.
Open the file in your slicer, check the scale and thin details, then choose settings for your printer and material.
Give a small space a name
Name & Place makes a flat plaque or a standing desk sign with your words on the front. It can label a creative corner, mark a personal workspace or become a small gift. Choose a pill, oval, ticket or soft rectangle and decide how the finished sign will be displayed. A flat model does not include a mounting system. A standing model adds a connected foot but still needs a stability check on the intended surface. The download is a digital model, not a manufactured sign or an installation service.
Set the proportions before the words
The starting plaque is about 100 mm wide, 32 mm high and 3 mm thick. Those dimensions suit a short name better than a paragraph. If you add a second line, increase the available face height or shorten the wording before shrinking everything to tiny lettering. The little-label preset provides a smaller starting point for brief text. Look at the preview at roughly real size as well as zoomed in. A balanced design on a large monitor can become unreadable on a narrow shelf or drawer.
Choose relief that matches the message
Raised lettering gives a clear transition above the base and can be suitable for a height-based filament change. Engraving cuts into the face while preserving a floor; it does not make a through-cut stencil. Stepped lettering changes the profile and needs its own layer review. Move text away from ticket notches and rounded edges so it is not clipped by the face. Add motifs after the words are legible. The palette is a design aid only: a downloaded STL contains geometry, without a stored colour or printer profile.
Print orientation changes the task
A flat plaque can often be inspected face up with its broad back on the bed. For a typical 0.4 mm nozzle, begin with a 0.2 mm layer height and three walls, then examine the actual paths and the letter transition. A standing desk sign has a vertical face and a foot; overhangs may require supports or another orientation. Think about support marks on the visible face before choosing the print arrangement. These are trial suggestions, not settings backed by a physical print test of your sign.
Allow room around the complete model
The width control describes the plaque, while standing depth includes the foot. Read the full export size below the preview and check your usable printer area, leaving room for adhesion aids. A long name is fitted to the face rather than automatically granting more readable space. Increasing text scale can cause clipping instead of making a wider plaque. If you scale the STL down, the foot, thickness and raised details shrink together. It is usually clearer to change dimensions in the editor and rebuild with the intended proportions.
Make one sign before a matching set
If the sign rocks, inspect the foot for warping and confirm that the intended display surface is flat. If the first layer spreads into fine gaps, review the slicer profile before altering all of the lettering. A weak vertical face can need a different orientation, wall strategy or material. Save the design and record your physical sample dimensions once you are satisfied. Do not assume a successful short name validates a longer second line. Review each version for spelling, clipped characters and small strokes before giving the finished print to someone else.
Frequently asked questions
Can I make a sign that stands on a desk?
Yes. Choose the standing display style, which adds a connected foot. Inspect supports, flatness and stability with a physical sample.
Does a flat plaque include mounting holes or adhesive?
No. Plan and assess your own mounting method. The generated plaque is not a complete installation kit.
Why is my long name hard to read?
The words must fit the available face. Shorten the text, enlarge the plate or choose a bolder font instead of relying on very small strokes.
Can the first and second lines use different colours?
The STL does not assign filaments. Inspect the heights and use your slicer's supported colour-change workflow only where the geometry permits it.
Keep making
01. Pick a starting point
Choose a style in Design, then explore the details. The preview updates as you create. Undo and redo let you try a different direction.
02. Make it yours
Explore Decorate for little motifs or your own SVG. Move, rotate, raise or engrave the details. Add your words and mix a colour palette. Preview colours are inspiration; STL files contain geometry only.
03. Bring it to life
Save your settings to My makes or download an STL. Check scale, supports and small details in your slicer. Read the printing guides →