Loading editor…
A lovely place to start
These are decorative awards. Ribbon, pin hardware and adhesives are not included. A standing trophy may need supports in your slicer.
Free STL downloads, no account needed · personal use today
Separate-part 3MF export is not available today.
Open the file in your slicer, check the scale and thin details, then choose settings for your printer and material.
Celebrate something specific
A finished book, a first bike ride or a friendly game can deserve a small award. Tiny Triumphs lets you make a medal, star badge, decorative trophy or a softer flower-shaped celebration. Begin with what the recipient achieved and choose a short phrase that will still read on a small object. A personal message often does more than a crowded face of symbols. The editor supplies digital geometry only. Ribbon, pin hardware, adhesives and a finished printed award are not included with the download.
Pick between flat and standing
The round medal starts near 64 mm with a 3 mm body and raised lettering. Flat badges offer a broad contact area for a first slicing experiment. The standing trophy rotates the award face upright and connects it to a foot, so its printing needs differ from those of a flat medal. Inspect the base and overhangs in a side view before choosing an orientation. A ribbon hole is available for medals and badges; it is not used for the standing trophy. Measure your ribbon separately.
Let the message breathe
Try a name on the first line and a short achievement on the second. Available space varies with the outline: a star has less uninterrupted central area than a round medal. If the text becomes clipped or too narrow, shorten the message before increasing the overall size. The Text controls let you move, rotate and scale the words. Raised lettering can support a height-based colour change; engraving produces a recess in the face. Neither effect automatically chooses filament or guarantees readable strokes at the final printing scale.
Use the slicer as a second preview
For a flat award with a typical 0.4 mm nozzle, a 0.2 mm layer height and three walls are useful starting settings to inspect. Check the first layer around star tips and the hole, then examine the text transition. A standing trophy may need supports depending on orientation, material and slicer. Look at where supports would touch the visible face and base before accepting them. These are trial settings rather than a tested print profile. A mesh that passes software checks still needs a physical sample.
Fit the award to its purpose
Bigger is not always easier to give or wear. Read the complete width and depth under the preview and compare them with your printer's usable bed. Leave room for adhesion aids. Changing text size should not require enlarging a wearable medal beyond a sensible scale. If you resize the whole STL, the ribbon hole and body thickness change too. For a standing piece, check the footprint and stability on its intended surface. The model is decorative and is not a load-bearing fixture or a certified children's accessory.
Fix weak points before the ceremony
A curling point may need a less demanding outline, better adhesion or different cooling. If the ribbon rubs against a rough hole, inspect and test the finished edge rather than assuming the preview describes its feel. Thin engraved strokes can close up; widen the lettering or reduce its complexity. A trophy that rocks needs a flat, sound foot and a stability check. Save the design settings before making variations so every name receives the same deliberate review. Plan enough time for one small trial and any correction before printing the final award.
Frequently asked questions
Can I make a medal and a trophy here?
Yes. Choose a flat medal or badge outline, or the standing trophy style. Check the different orientation and support needs in your slicer.
Is ribbon or a badge pin included?
No. Downloads contain geometry only. Supply suitable hardware and assess its attachment to the finished object.
How can I print the lettering in another colour?
For suitable raised designs, inspect the sliced text layers and use a supported filament change. STL itself contains no colour assignments.
Why does a long message disappear at the edges?
Lettering is clipped to the actual award face. Reduce its scale, move it inward or shorten the wording, especially on narrow star shapes.
Keep making
01. Pick a starting point
Choose a style in Design, then explore the details. The preview updates as you create. Undo and redo let you try a different direction.
02. Make it yours
Explore Decorate for little motifs or your own SVG. Move, rotate, raise or engrave the details. Add your words and mix a colour palette. Preview colours are inspiration; STL files contain geometry only.
03. Bring it to life
Save your settings to My makes or download an STL. Check scale, supports and small details in your slicer. Read the printing guides →